LM Vertical Grinding Mill

Welcome to our website, whenever you have some questions about our products, just contact us! We will always be online!

LM Vertical Grinding Mill

Zenith lm series vertical milling machine sets medium crushing, drying, grinding, classifying and other functions as a whole, being the ideal equipment in the grinding industry. It adopts the technology that vertical roller grinding material directly on the disc, with low energy consumption; for the roller is not contact with the disc directly in the work, and the roller and liner are made by quality materials, it is of less wear and long life. Its automatic control system can reach remote control, which is easy to operate; there is the device to prevent roller sleeve contact with disc liner directly, and avoid the destructive impact and severe vibration; we can turn the rotating arm by repairing fuel tank, replace the roller and liner are more convenient, which can reduce the downtime. It features small vibration, low noise, and sealing device as a whole, and the system also works with no pressure and dust spills.

Grinding Mill Advantages

  1. Low running costs
  2. Simple and reliable operation
  3. Energy conservation and environmental protection
  4. Less noise
  5. Requires less floor space

Grinding Mill Benefits

  1. Higher energy efficiency
  2. Lower Media Consumption – Typically coincides with energy savings
  3. Requires Little Maintenance – saves time and labor
  4. Long Wear Life – lower wear parts costs and labor associated with replacement
  5. High availability
  6. Lower installation cost –Shorter duration and simpler foundations
  7. Greater operating safety

Zenith LM Series Vertical Mill Is Mainly Suitable For

  1. The grinding process of metallurgy, building materials, chemical, mining and other mineral industries,
  2. Thermal insulation materials and other non-flammable burst materials whose Mohs hardness is below.

LM series milling machine is the vertical mill products with independent intellectual property rights, which is based on the advanced grinding technology of my company in the technical advantages of vertical mill products increasingly prominent situation. We actively learn from foreign successful experience, and constantly innovate through R & D team upgrade.

Grinding Mill Working Principle

The motor drives the grinding disc to rotate by the reducer, etc. the air lock feeder from the feed inlet fall at the center of the grinding disk, and hot air into the air from entering the mill. As the disc rotates, the material in the role of centrifugal force, move to the edge of the grinding disc, the disc of the annular groove by roller compaction and crushed, crushed material by wind ring high-speed airflow within the edge of the grinding disc, large particles directly onto the disc re grinding, material gas flow through the upper separator, in under the action of rotating rotor, coarse powder from cone to disc re grinding, qualified fine powder along with air flow through the mill, dust collection device, namely product, moisture containing material is dried in the contact with hot air flow, by adjusting the temperature of hot air, can satisfy the different humidity material requirements, to achieve the required product moisture. By adjusting the separator, can achieve the desired products with different thickness.

Model LM130K LM150K LM170K LM190K LM220K LM130M LM150M LM170M LM190M LM220M LM130N LM150N LM170N LM190N LM220N
Wheel diameter(mm) 1300 1500 1700 1900 2200 1300 1500 1700 1900 2200 1300 1500 1700 1900 2200
Output (th) 10-30 13-40 18-57 23-72 36-110 10-15 16-22 20-28 26-35 35-50 5-14 7-20 8-27 9-30 18-55
Finish fineness μm 170-45 170-45 170-45 170-45 170-45 170-45 170-45 170-45 170-45 170-45
Mesh 80-325 80-325 80-325 80-325 80-325 80-325 80-325 80-325 80-325 80-325
Coal powder fineness (R0.08) 5-20% 5-20% 5-20% 5-20% 5-20%
Coal powder moisture (%) <1% <1% <1% <1% <1%
End product moisture (%) ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1%
Grinding material particle size D80 (mm) <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 <10 <10
Grinding material max feed size(mm) <38 <40 <42 <45 <50 <38 <40 <42 <45 <50 <38 <40 <42 <45 <50
Moisture of grinding material not to dry (%) <4% <4% <4% <4% <4% <4% <4% <4% <4% <4%
Matieral moisture of into mill (%) <15% <15% <15% <15% <15%
Moisture of grinding material need to dry (%) 4%-15% 4%-15% 4%-15% 4%-15% 4%-15% 4%-15% 4%-15% 4%-15% 4%-15% 4%-15%
Into mill air temperature (℃) <350 <350 <350 <350 <350 <350 <350 <350 <350 <350 <350 <350 <350 <350 <350
Out of the mill air temperature (℃) 70-95 70-95 70-95 70-95 70-95 75-95 75-95 75-95 75-95 75-95 70-95 70-95 70-95 70-95 70-95
Raw coal hardgrove grindability index (HGI) >55 >55 >55 >55 >55
Main motor power (kw) 200 280 400 500 800 185 250 315 400 500 200 280 400 500 800
Contour dimension Length (mm) 5520 6550 7170 7580 8080 5520 6550 7170 7580 8080 5520 6550 7170 7580 8080
Width (mm) 2500 3070 3460 3320 4660 2500 3070 3460 3320 6700 2500 3070 3460 3320 4660
Height (mm) 7060 7560 8300 8960 9020 7060 7560 8300 8960 9020 7060 7560 8300 8960 9020

Please fill in your name and your message and do not forget mail and/or phone if you like to be contacted. Please note that you do not need to have a mail programme to use this function.